Samsung Galaxy S3 ON GT-I9300T ROM Firmware Flash File

In this post, You will get the latest Download links for Samsung Galaxy S3 ON GT-I9300T  stock ROM Firmware Flash File, The Firmware File download link shared on this post is officially issued by the company. It will help you to recover the mobile phone, if you have experienced bootloop, System errors, Unbrick dead after flash, Screen Lock, Software error, update error, Pattern Lock, FRP / Google Account, hanging and dead issue.  Flash the Stock Firmware using Odin Flash Tool.how Samsung Galaxy S3 on firmwera 1

 

Firmware comes in a zip package containing Flash File, Flash Tool, USB Driver, and How-to Flash Manual.

Download Samsung Galaxy S3 ON GT-I9300T ROM Firmware Flash File

File Name: I9300TDUEMB1_I9300TTHLEMA1_THL.zip
Country: Thailand
File Size: 810 MB
Android Version: 4.1.2
Download

File Name: I9300TDUEMJ1_I9300TTELEMJ2_TEL.zip
Country: Australia
File Size: 1 GB
Android Version: 4.1.2
Download

File Name: I9300TDUEMJ1_I9300TTNZEMJ1_TNZ.zip
Country: New Zealand
File Size: 852 MB
Android Version: 4.1.2
Download

File Name: I9300TDUUGNA4_I9300TTHLGNA1_THL.zip
Country: Thailand
File Size: 879 MB
Android Version: 4.1.2
Download

File Name: I9300TDUUGOK1_I9300TTELGOK1_TEL.zip
Country: Australia
File Size: 939 MB
Android Version: 4.1.2
Download

File Name: I9300TDUUGOK1_I9300TTNZGOK1_TNZ.zip
Country: New Zealand
File Size: 931 MB
Android Version: 4.1.2
Download

Download odin: Click here
USB driver: Click here

Step by step to Flash Samsung Galaxy S3 ON GT-I9300T ROM Firmware Flash File

Comply with those steps given underneath:

  1. Extract (unzip) the given firmware file
  2. Download Odin Tool and extract it afterwards open the execute file
  3. Installed the USB driver to Set up the Samsung Galaxy S3 ON GT-I9300T device with the PC
  4. hold Home + Power + Volume Down to put the device in download mode and then plug-in the data cable and press the “Volume UP button to continue
  5. Connect your Samsung phone and wait until you get a blue sign in Odin
  6. Add the 1 file Samsung firmware to AP/PDA or 4 files Samsung firmware (AP/BL/CP/CSC) to it’s slots
  7. Make sure re-partition is NOT ticked
  8. Click the START button, sit back and wait few minutes
  9. When finished, the flashing device will reboot automatically and you will see a pass message in Odin.

NOTE: Use the Samsung Galaxy S3 ON GT-I9300T ROM firmware file and all flashing tools at your own risk

  • Backup the device data to your (PC/USB).
  • After flashing the firmware file on your mobile device. Therefore your all personal data will be deleted and  your device is finally flashed.

Leave a Comment

Your email address will not be published.